TWI Digital Library

Fusion devices include plasma facing components consisting of copper-based heatsinks embedded with cooling channels to handle the high operational heat loads. Stationary shoulder friction stir channelling (SSFSC), trademarked as Coreflow®, is a …

A friction melt bonding process was employed to fabricate dissimilar lap joints between ultralow carbon (0.01%C, 0.14%Mn) or dual-phase DP600 (0.08%C, 1.51%Mn, 0.35%Cr, 0.06%Mo) steel grades and 1050, 2024 or 6061 aluminium alloys and the microstruc…

Periodic material phenomena around a threaded pin in friction stir welding (FSW) were investigated with a fully transient thermomechanically coupled numerical simulation, in which the transient motion of the threaded pin was included in the computat…

Friction stir welding was employed to fabricate butt joints in Ti-6%Al-4%V sheets (thickness 2 mm) and the effect of process parameters on joint microstructure and plastic deformation behaviour was investigated. Welding experiments were conducted at…

A plastic replication technique was employed to investigate surface crack initiation and growth in 2024-T351 Al alloy friction stir welded (FSW) joints during fatigue bending tests. Fatigue failure mechanisms were examined, and a modified Hobson-Bro…

The mechanical properties and microstructures of friction stir butt welds in 6.4 mm and 12.7 mm thickness quenched and tempered martensitic steel plate were compared with those of GMA butt welds in the same parent metal. The friction stir welds in t…

SiC particle reinforced 2124Al metal matrix composite (MMC) plates (thickness 8 mm) were joined by friction stir welding (FSW) and the relationship between process parameters, weld defect formation and joint mechanical properties was investigated. T…

Butt joints were fabricated in sheet specimens of 2017A-T451 alloys (Al, 4.14%Cu) and cast plates of Al, 8.6%Si, 0.31%Mg by friction stir welding (FSW) and their microstructure and mechanical properties were investigated. Welding experiments were co…

Friction stir welding experiments were undertaken on Ti-6%Al-4%V sheets (thickness 2 mm) in order to investigate the influence of process conditions on stir zone microstructure and local texture. Welding was performed at rotational speeds of 225-300…

Friction stir welding (FSW) experiments were conducted on magnesium alloys, wrought AZ31 (Mg, 3%Al, 1%Zn) and cast AZ91 (Mg, 9%Al, 0.6%Zn), to investigate the effect of process conditions on microstructure and hardness. Welding was performed at rota…

An adjustable tool was employed during friction stir welding (FSW) of A1050 pure aluminium sheets (thickness 5 mm) and the effects of the tool shoulder and probe on the stir zone shape and defect formation were investigated by changing the rotationa…

The microstructure and postweld heat treatment of friction stir welds in age hardening aluminium alloys were investigated. Aluminium alloy plate (2014-T6 and 7075-T6 and -T651) of thickness 6.35 mm (0.25 in) was friction stir welded and the joints s…

A fully coupled thermomechanical formulation was proposed for the numerical modelling of friction stir welding (FSW) to facilitate the efficient simulation of different types of material flows and accurate computation of the resulting thermomechanic…

Welded joints were fabricated in AZ31 magnesium alloy (Mg, 3.01%Al, 0.9%Zn, 0.5%Mn) sheets (thickness 2 mm) by bobbin tool friction stir welding (BTFSW) and the influence of process parameters (rotational and welding speeds) on their microstructure …

The feasibility of friction stir welding (FSW) for welding aluminium alloy 7020, used for the construction of light armoured fighting vehicles, was investigated and compared with MIG welding. Two joint configurations were tested: butt welding in 100…

A 3D computational fluid dynamics model was developed to conduct numerical simulations of heat generation, material flow and temperature profiles during reverse dual-rotation friction stir welding, a process variant in which the tool pin and the ass…

With regard to the application of wear resistant surface layers on chosen substrates, an investigation is presented into the deposition of cermet (WC, 10%Co, 4%Cr or Cr3C2-NiCr) and oxide (Al2O3) coatings onto AA 5083 aluminium alloy substrates by c…

The relationship between microstructure and corrosion of friction stir welded joints in aluminium alloys 2024-T351 (Al, 4.43%Cu, 1.42%Mg, 0.61%Mn) and 7010-T7651 (Al, 5.92%Zn, 2.11%Mg, 1.68%Cu) was investigated. Plate of 6.35 mm (0.25 in) thickness …

With regard to the dependence of shoulder friction generation in bobbin friction stir welding on the interference (compression) between the substrate and the tool, an investigation was undertaken into the effects of different interference (compressi…

AA 2219-T87 (Al, 5.8-6.8%Cu, 0.2-0.4%Mn) aluminium alloy plates (thickness 8 mm) were joined by friction stir welding (FSW) and their microstructure, mechanical properties and corrosion behaviour were investigated. FSW experiments were conducted usi…