-
10th International Symposium 2014
Friction stir welding trials were undertaken on AA 7075-T7351 aluminium alloy plates (thickness 9.525 mm) to investigate the influence of backing plate characteristics on heat input and cooling rate. Experiments were performed on an MTI RM2 friction…
-
9th International Symposium 2012
Friction stir welding experiments were undertaken on rolled plates (thickness 25.4 mm) of AA 6061-T6 aluminium alloys to investigate the role of backing plate material on thermal gradient changes in the through-thickness direction. Welding was perfo…
-
8th International Symposium 2010
Effect of tool displacement on defect formation in friction stir welding of aluminium and copper
ArticleThe effect of tool pin displacement on defect formation in friction stir welded (FSW) 5052 Al alloy and C11000 copper in butt joint configurations was investigated, with the tool pin plunged first in copper, secondly at the weld joint centre line an…
-
2nd International Symposium 2000
Friction stir welded joints, produced in an extruded profile of aluminium alloy 6082-T6 using run on and run off plates, were evaluated by measurement of mechanical properties. Plate of 6 mm thickness was welded using a range of process parameters, …
-
13th International Symposium 2024
Additive friction surfacing (AFS) is a variant of friction surfacing (FS) where multiple layers of feedstock material can be deposited to generate a near-net shape part. AFS has the potential to yield significantly higher deposition rates than tradi…
-
7th International Symposium 2008
Metallographic observations, hardness distribution measurements and fatigue tests were undertaken to investigate the discontinuity state related to the crack nucleation site in butt joints fabricated in 2024-T3 aluminium alloys (Al, 3.8-4.9%Cu, 1.2-…
66 results
in Symposia Papers