-
7th International Symposium 2008
A friction stir spot welding process was employed to fabricate dissimilar joints between 6016 aluminium alloy (Al, 1-1.5%Si, 0.25-0.6%Mg) and galvanised HSLA 280 phosphorus-hardened cold rolled steel (0.08%C, 1.3%Mn, 0.1%Ti, 0.08%Al, 0.09%P), and th…
-
10th International Symposium 2014
Friction stir welding (FSW) experiments were undertaken on single crystal and polycrystalline pure iron sheets (thickness 1.5 mm) as well as a polycrystalline carbon steel, and the microstructure, material flow characteristics and plastic deformatio…
-
9th International Symposium 2012
Incorporation of friction stir welding (FSW) in a parallel kinematics machine (PKM) 5-axis machine was undertaken with the intelligent computer aided manufacturing (ICAM) approach to optimise process parameters and tool paths by using available CNC …
-
4th International Symposium 2003
A discussion is presented on research being undertaken to evaluate friction stir welding (FSW) as a suitable method for joining Airbus aircraft wing structures made of 2000 and 7000 series aluminium alloys. Suitable FSW machines were developed and v…
-
1st International Symposium 1999
The use of friction stir welding, as an alternative to bolted or riveted joints, for the assembly of Airbus wings is discussed. Issues considered include: cost reduction, weight reduction, joint quality, and enhanced in-service performance. Potentia…
-
9th International Symposium 2012
Friction stir lap diffusion welding was employed to fabricate dissimilar AA 6060 aluminium alloy/mild steel joints and mechanical testing and metallurgical examination of the weldments were undertaken to investigate the effect of microstructure form…
-
7th International Symposium 2008
Thermomechanical modelling of the friction stir butt welding process in AA 5083-H18 aluminium alloys was undertaken using a CFD (computational fluid dynamics) code to describe the steady state, and simulated temperature profiles were compared with t…
67 results
in Symposia Papers