TWI Digital Library

The formability of friction stir welded aluminium alloy tailored welded blanks (TWBs), as used in the automotive industry, was analysed, based on hardening exponent and anisotropy values obtained from tensile tests (parallel and normal to loading di…

An experimental study was carried out on friction stir welded aluminium alloy tailored welded blanks (TWB's) to determine mechanical properties and microstructural characteristics in order to evaluate friction stir welding (FSW) as a feasible method…

Friction stir welding (FSW) was carried out on AZ31 magnesium alloy (Mg, 3%Al, 1%Zn) plates of thickness 6 mm in order to examine the relationship between weld microtexture and tensile properties. Orientation imaging microscopy was used to examine m…

The effects of friction stir welding (FSW) parameters and tool geometry on the forces and torques generated during the FSW of four aluminium alloys were studied. The alloys were 6082-T6 (6.45 mm), 5083-H111 (6.55 mm), 2014-T6 (5.9 mm) and 7075-T7351…

The decision to use friction stir welding (FSW) in the manufacture of aluminium alloy car wheels by Simmons Wheels, Sydney, Australia is described. Rim sections are formed from alloy 6061 in thicknesses of 4-6 mm. These are attached to cast or forge…

Friction stir spot welded joints in aluminium alloy 6061-T4 were studied. Sheet of 1, 1.5, 2, and 3 mm thickness was friction stir welded to sheet of 3 mm thickness, using welds of 8-18 mm in length (equivalent in area to circular resistance spot we…

Friction stir welding (FSW) was applied to the 10 mm thick plate for the Fe-Mn-Si (FMS) alloy using a polycrystalline cubic born nitride (pcBN) tool. The sound FSW joint was obtained without macro-defects although small pores were slightly distribut…

Very high speed (10m/min [394 ipm]) friction stir welding (FSW) was demonstrated in both 2 mm thick AA6061-T6 and AA5051-H32. For AA6061-T6, weld parameters of 2,025 kg (4,500 lbs.) at 10,000 rpm and for AA5052-H32 weld parameters of 1,665 kg (3,700…

Coupons with both triangular and rectangular gaps were prepared from AA 2024 aluminium alloy plate stock by friction stir welding (FSW) and volumetric defect formation was investigated by a neural network-based electronic NDE (e-NDE) technique. The …

A simplified finite element modelling approach was employed to analyse the effect of localised dynamic cooling on residual stress development during friction stir welding (FSW), and the model predictions were compared with x-ray synchrotron and neut…

The development and use of friction stir powder processing (FSPP) to overcome defect formation and to control mechanical properties is discussed and FSPP of AA 1050 aluminium (Al, 0.06%Si, 0.34%Fe, 0.02%Cu) is reported. In FSPP, powder with a contro…

The effects of stir rod angle (0-3 degrees), rotation speed (500-2500 rpm) and travel speed (1-8 mm/s) on metal flow in friction stir welds in pure aluminium (A-1100) and an Al-0.5%Mg alloy (A-5005) were studied. The microstructure, hardness and ten…

The development of robots, tools and control systems for three-dimensional friction stir welding of aluminium alloy plate up to 10 mm thickness is described. Robots have been developed with a triangulated arm construction, which provides the necessa…

Shipbuilding applications of friction stir welding in the production of prefabricated aluminium alloy sections are described. Panels of up to 13 x 16 m, thickness 3-7 mm, may be produced with close tolerances and good surface finish, reducing cost a…

With regard to the capability of ultrasonic vibration enhanced friction stir welding (UVeFSW) to improve weld formation quality as well as the microstructure and mechanical properties of the welded joints, experiments were undertaken to clarify the …

The friction stir welding (FSW) process was determined for stiffener to skin lap joints of different aluminium alloys (similar 2024 T3, similar 2139 T3 and T8, dissimilar PA 765 T79 extrusion on 2139 T8 skin) and FSW procedures with retractable pin …

Square butt welds of AA 7075-T6 sheet (thickness 1.3 or 3.2 mm) to AA 7075-T6 extrusions were fabricated by friction stir welding (FSW) procedures incorporating the controlled introduction of defects, and the impact of the defects on joint mechanica…

To assess the feasibility of friction stir welding of Ti-6Al-4V alloy (thickness 5 mm), appropriate pin tool material and processing parameters were determined, thermal and environmental management systems were tested, and both A- and B-basis design…

Two 3D numerical simulation models were employed to investigate the relationship between forces and torques during high-speed friction stir welding (FSW) with respect to mechanistic defect development owing to process parameter variations, and the t…

A friction stir welding (FSW) methodology, incorporating Taguchi quality engineering to optimise process parameters, was developed to fabricate a cold plate consisting of copper pipe embedded in the machined groove of a 6061 aluminium alloy base pla…