TWI Digital Library

Two initiatives are presented to develop friction stir welding (FSW) and friction stir spot welding (FSSW) design data for the aerospace industry: a path independence initiative for FSW butt joints and qualification of FSSW welds for lap joints as i…

Thick section friction stir welds were made in 25.4 mm (1 in) 5083-H131 and in 18.4 mm 2195-T8P4 aluminium alloy plates by single-pass friction stir welding (FSW) using new welding tool designs. The alloys are used for aerospace applications. The sh…

Precipitation hardened copper alloy sheets (thickness 2 mm) containing Cu, 0.9-1.2%Cr, 0.06-0.09%Zr were joined by friction stir welding (FSW), process parameters were optimised to realise defect-free joints, and the microstructure and mechanical pr…

An investigation is presented into the bending properties of welded joints prepared by friction stir welding (FSW) in various structural aluminium alloys during which the influence of process conditions and alloy composition (Mg, Si, Zn levels) was …

To meet the needs of lightweight automobile design to join thin steel structures to thicker aluminium sheets, two joint geometries for high-strength friction stir welding (FSW) of dissimilar and unequal thickness sheets were developed: one involving…

The deformation microstructures formed during friction stir welding (FSW) of 7075-T6 aluminium alloy (Al, 5.76%Zn, 2.46%Mg, 1.32%Cu) were studied using SEM with electron back-scattered diffraction. The sheet thickness was 1.5 mm. The alloy was evalu…

Friction stir welds in austenitic stainless steels 316L (0.019%C, 0.87%Mn, 17.70%Cr, 12.19%Ni, 2.19%Mo) and 304 (0.040%C, 1.08%Mn, 18.10%Cr, 8.56%Ni); duplex stainless steel 329J4L (0.016%C, 0.78%Mn, 24.81%Cr, 7.27%Ni, 3.13%Mo, 0.43%Cu, 0.41%W); and…

An experimental canister welding machine was developed in order to evaluate FSW as a method of welding the copper canisters used in the long term storage of nuclear waste. Preliminary trials involved the development of a machine with sufficient stif…

To gain further understanding of the mechanism for abnormal grain growth occurring in the stir zone of friction stir welded (FSW) aluminium alloys during post weld heat treatment (PWHT), details of the grain growth phenomena were examined in commerc…

The principles of spot friction welding (SFW) and the differences between SFW and linear friction stir welding (FSW) are outlined. Displacement control and load control of SFW machines are described. Experiments were conducted using a displacement-c…

An investigation was undertaken into the efficiency and cost effectiveness of two process chains for the production of an AW-70xx aluminium alloy telescopic beam for a crane boom (length 8 m, sheet thickness 4 mm), and a comparison between friction …

The tool workpiece thermocouple (TWT) temperature measurement method was applied for optimisation of the initial welding phases (plunge and dwell) in conventional FSW (friction stir welding) and FSSW (friction stir spot welding), and an analysis of …

A review is presented of various models developed to understand the effects of thermal cycles and metal flow behaviour on the microstructure and properties of welded joints fabricated by friction stir welding of steel, and a comprehensive numerical …

Additive friction surfacing (AFS) is a variant of friction surfacing (FS) where multiple layers of feedstock material can be deposited to generate a near-net shape part. AFS has the potential to yield significantly higher deposition rates than tradi…

A discussion is presented on developments in polycrystalline cubic boron nitride (PCBN) tool design for use in the friction stir welding of high temperature materials such as steels. Improvements in tool material grades, tool design and FSW equipmen…