TWI Digital Library

With regard to the need to control process temperature in friction stir welding to enhance process stability and weldment mechanical properties, a feedforward feedback control system was designed based on two nonlinear single input single output (SI…

Friction stir welding (FSW) experiments were undertaken on 4142 low alloy and S7 tool steels as well as dissimilar steel combinations and the microstructure and mechanical properties of the welded joints were investigated. FSW was conducted using an…

Simultaneous double-sided friction stir welding (DFSW) experiments were undertaken on AMX 602 alloys (Mg, 6%Al, 0.5%Mn, 2%Ca) and the influence of diverse material flows caused by differing process parameters (rotation direction and travel speed) an…

With regard to the development of 9%Ni steels for cryogenic applications, an investigation was undertaken into the metallurgical weldability of ASTM A553 Type I steel (0.08%C, 0.73%Mn, 9.4%Ni) joined by double-sided two-run friction stir welding (FS…

The influence of pin length and insulating anvil material on friction stir spot welding (FSSW) of thin (0.9 mm) 6111-T4 aluminium (Al, 0.73%Si, 0.65%Mg, 0.96%Cu, 0.3%Mn, 0.2%Fe) was investigated. Welds were made varying the length of the tool pin (1…

A slide style presentation giving a market review of FSW, challenges for FSW users and process enhancements. The development of equipment and methods for floating bobbin tool FSW and stationary shoulder friction stir welding is outlined. Lifetimes o…

Conventional friction stir welding (FSW), hybrid FSW and thermal stir welding were evaluated and compared for the joining of a nickel-based superalloy Haynes 230. Welds were made in Haynes 230 NiCrW alloy (20-24%Cr, 13-15%W, 6.4 mm thickness), an in…

The friction stir spot welding (FSSW) technique was employed to weld low carbon steel, Invar and iron meteorite materials and the microstructure and mechanical properties of the welded joints were compared. FSSW experiments were performed on low car…

Friction stir welding was employed to fabricate dissimilar joints between 5A06-H112 aluminium alloy (Al, 5.8-6.8%Mg, 0.5-0.8%Mn) and 304L stainless steel (0.03%C, 18-20%Cr, 8-11%Ni) and material flow behaviour was investigated by microstructure obse…

With regard to the fabrication of hollow structures by the inversion friction stir welding (IV-FSW) technique, welded joints were fabricated in A-1050 and A-6061 aluminium alloy and SPCC steel sheets (thickness 2 mm) by IV-FSW and their surface appe…

Defects and their mitigation associated with the fabrication of fluid-cooled aluminium alloy heatsinks for electronic applications are discussed. The heatsink consisted of an aluminium alloy 6063 substrate (310 x 300 mm) with a series of rectangular…

Arcan tests (pure tensile, pure shear and mixed tensile/shear loads) were performed on parent material (6056-T78 aluminium alloy) and friction stir welded (FSW) specimens for comparison purposes and to assess the capability of strain field measureme…

To investigate the potential of mechanical tensioning (MT) to reduce residual stresses in friction stir welding (FSW), thereby eliminating buckling, FSW was performed on 2024-T351 aluminium alloy (thickness 3.2 mm) with different tensile stress leve…

Friction stir welding (FSW) experiments were performed on 6005A-T6 (Al, 0.49%Mg, 0.61%Si) alloy plates (thickness 6 mm) using a fully instrumented CNC milling machine, and the microstructure and mechanical properties of the welded joints were invest…

With regard to the problem of parameter development for friction stir welding (FSW) of workpieces with 3D joints, a self-tuning algorithm is presented based on the tool-workpiece thermocouple (TWT) method for temperature measurement to facilitate th…

Similar and dissimilar friction stir welds (FSW) were performed between 2014-T6 and 6061-T6 aluminium alloy sheet (4.70 mm thickness). Weld speed of 450 and 90 mm per minute were used to produce welds described as cold and hot welds respectively. Ad…

Friction stir spot welding (FSSW) experiments were undertaken to fabricate dissimilar metal joints between aluminium and light metals such as magnesium and titanium, and the microstructure and mechanical properties of the weldments were investigated…

Tapered probe and parallel probe tools were employed in friction stir welding of thick section AA 6082-T6 aluminium alloy specimens (thickness 38 mm) and the effect of tool geometry on weldment microstructure and crystallographic texture was investi…

Stationary shoulder friction stir welding (SSFSW) and conventional FSW experiments were undertaken on AA 7050-T7651 alloy plates (thickness 6.3 mm) to demonstrate the advantages of SSFSW with respect to surface finish, thermal profile symmetry, HAZ …

Based on a friction model incorporating the dynamic coupling between friction and material flow in heat transfer and fluid flow models, a computational fluid dynamics (CFD) methodology was employed to study material flow during friction stir welding…