TWI Digital Library

Experimental measurements and thermal modelling were used to determine the transient heat loss into friction stir welding tools and so calculate the welding efficiency. Energy inputs were determined from force and torque measurements made whilst per…

Multi-material structure is effective way to achieve lightening of vehicles for reduction of CO2 emission. Thus, carbon fiber reinforced thermo-plastic (CFRTP) and aluminum alloy (Al) are useful materials for lightening of vehicles. For fabrication …

Weld zone simulation and ballistic testing were employed to determine the effect of friction stir welding on the ballistic performance in the HAZ, thermomechanically affected zone and nugget, under direct impact, of AA 7010-T7651 high-strength alumi…

Rotary friction welding was employed to fabricate joints between an ASTM A36 steel pipe (0.11%C, 0.2%Si, 0.92%Mn, 0.02%Cr, 0.02%Nb, 0.03%Al) and an API 6A flange and microstructural analyses and mechanical tests were undertaken to investigate the se…

Modelling tools were developed to describe the relationships between process parameters, microstructural evolution and mechanical properties of the weld in friction stir welding (FSW). Experiments were conducted using aluminium alloy 6056. Initial t…

A friction stir welding (FSW) procedure using a W-Re alloy tool, magnetic welding fixture and a high-speed steel backing bar was developed for application to precipitation-hardened martensitic stainless steel (13.7%Cr, 7.1%Ni) thin sheet (thickness …

Friction stir spot welding experiments were conducted on dissimilar metal joints between AA5052 aluminium alloy and two kinds of steel (980 MPa high tensile strength steel and 270 MPa mild steel), and the microstructure and mechanical properties of …

Computational fluid dynamics (CFD) methods were used to model the metal flow in the friction stir welding (FSW) process in order to optimise the pin profile to minimise the traversing force; welding experiments were carried out to validate the findi…

5A06 aluminium alloy (Al, 6.8%Mg, 0.5%Mn) sheets (thickness 5.17 mm) were joined by friction stir welding (FSW) and the microstructure and mechanical properties of the welded joints were investigated. Welding was performed using a tool pin with a sc…

Friction stir welding (FSW) was investigated in aluminium alloys used in aircraft structures. Extruded shapes in alloys 2024 (Al, 4.96%Cu), 7475 (Al, 5.96%Zn, 2.57%Mg, 1.62%Cu) and 7050 (Al, 6.29%Zn, 2.36%Mg, 2.00%Cu) were welded; welds were evaluat…

The influence of friction stir welding on the microstructure and mechanical properties of aluminium alloy 6061 was investigated. Aluminium alloy 6061-T651 plate of 6.4 mm (0.25 in) thickness was friction stir welded and the joints characterised by o…

A stop-action technique was used to stop tool motion during friction stir welding of aluminium alloys in order to study the interactions between the parent material and welding tool pin in the keyhole. Welds were made in 25 mm thick Al-Cu-Li 2195 pl…

Dissimilar butt joints between A516 steel (0.15%C, 0.95%Mn, 0.03%Cr, 0.01%Ni, 0.29%Al) and Inconel 625 (Ni, 22.6%Cr, 9.4%Mo, 3.5%Nb) were fabricated by friction stir welding and recrystallisation and texture properties were investigated. Welding was…

Friction stir welding (FSW) trials were carried out for thin HSLA-65 steel plate (6 mm thickness) to evaluate the potential benefits of using induction preheat. Other studies including tool design and multi-run welding are also evaluated as methods …

This paper describes the joining criterion for lap joining of dissimilar metal materials of aluminum and stainless steel by friction stir. A criterion for evaluating the joined state or non-joined state is proposed, which is led by the concept based…

With regard to the production of wear resistant friction stir welding (FSW) tools by laser implantation of ceramic particles, an investigation was undertaken to examine the effect of laser implantation on tool surface hardness, abrasive wear and lif…

Friction stir welding experiments were undertaken on thin sheet specimens (thickness 0.8 mm) of 5754-H111 alloys (Al, 2.7%Mg) in a butt joint configuration, and the influence of process conditions on microstructural, mechanical and corrosion propert…

With regard to the production of aluminium alloy T joints for stiffened panel construction by friction stir welding (FSW), an investigation is presented into the fabrication of FSW T joints with AA 6082-T6 alloys and the influence of welding paramet…

Friction stir welding was employed to fabricate dissimilar joints between 5A06-H112 aluminium alloy (Al, 5.8-6.8%Mg, 0.5-0.8%Mn) and 304L stainless steel (0.03%C, 18-20%Cr, 8-11%Ni) and material flow behaviour was investigated by microstructure obse…

Stationary shoulder friction stir welding (SSFSW) and conventional FSW experiments were undertaken on AA 7050-T7651 alloy plates (thickness 6.3 mm) to demonstrate the advantages of SSFSW with respect to surface finish, thermal profile symmetry, HAZ …