Zaeh, M.F., Eireiner, D., & Papadakis, L. (2004, September). Friction stir welding with modern milling machines/requirements, approach and application. 5th International Symposium.
Zaeh M F, Eireiner D and Papadakis L. "Friction stir welding with modern milling machines/requirements, approach and application". 5th International Symposium (Sep.2004).
Zaeh, M F, Eireiner, D and Papadakis, L. "Friction stir welding with modern milling machines/requirements, approach and application". 5th International Symposium (Sep.2004).
Zaeh M.F., Eireiner D. and Papadakis L.Friction stir welding with modern milling machines/requirements, approach and application. 5th International Symposium. 2004 Sep; .
Zaeh, Eireiner & Papadakis 2004, 'Friction stir welding with modern milling machines/requirements, approach and application', 5th International Symposium. Available from: https://www.twi-global.com/technical-knowledge/fsw-symposium-papers/FSWSymposia-200409-11BPaper03.pdf.
Zaeh MF, Eireiner D, Papadakis L. Friction stir welding with modern milling machines/requirements, approach and application. 5th International Symposium. 2004;. https://www.twi-global.com/technical-knowledge/fsw-symposium-papers/FSWSymposia-200409-11BPaper03.pdf.
Zaeh MF , Eireiner DD, Papadakis LL. Friction stir welding with modern milling machines/requirements, approach and application. 5th International Symposium. 2004 Sep;. https://www.twi-global.com/technical-knowledge/fsw-symposium-papers/FSWSymposia-200409-11BPaper03.pdf.
Friction stir welding with modern milling machines/requirements, approach and application
- Zaeh M.F. ,
- Eireiner D. and
- Papadakis L.
- Zaeh M.F. ,
- Eireiner D. and
- Papadakis L.
September 2004
Repository
Description
The development of cryogenic tank domes for gas tanks for carrier rockets using friction stir welding (FSW) and high strength aluminium alloys of the 2xxx series is outlined. The verification of an existing NC-controlled milling machining centre (Carnaghi AC 57 T) for FSW using aluminium AW-2219, thickness 15 mm, is described. An online force measurement and data acquisitioning system and strategies for controlling the tool downward force during welding were developed. Force and torque measurements were made during plunging and during welding. Heat conduction into the milling spindle was examined.
5th International Symposium, 14-16 Sep 2004, Session 11B: Process Developments, Paper 03
Related Records
