Fukumoto, M., Yasui, T., Shimoda, Y., Tsubaki, M., & Shinoda, T. (2004, September). Butt welding between dissimilar metals by friction stirring. 5th International Symposium.
Fukumoto M, Yasui T, Shimoda Y, et al. "Butt welding between dissimilar metals by friction stirring". 5th International Symposium (Sep.2004).
Fukumoto, M, Yasui, T, Shimoda, Y, et al. "Butt welding between dissimilar metals by friction stirring". 5th International Symposium (Sep.2004).
Fukumoto M., Yasui T., Shimoda Y., Tsubaki M. and Shinoda T.Butt welding between dissimilar metals by friction stirring. 5th International Symposium. 2004 Sep; .
Fukumoto, et al 2004, 'Butt welding between dissimilar metals by friction stirring', 5th International Symposium. Available from: https://www.twi-global.com/technical-knowledge/fsw-symposium-papers/FSWSymposia-200409-7APaper01.pdf.
Fukumoto M, Yasui T, Shimoda Y, Tsubaki M, Shinoda T. Butt welding between dissimilar metals by friction stirring. 5th International Symposium. 2004;. https://www.twi-global.com/technical-knowledge/fsw-symposium-papers/FSWSymposia-200409-7APaper01.pdf.
Fukumoto MM, Yasui TT, Shimoda YY, Tsubaki MM, Shinoda TT. Butt welding between dissimilar metals by friction stirring. 5th International Symposium. 2004 Sep;. https://www.twi-global.com/technical-knowledge/fsw-symposium-papers/FSWSymposia-200409-7APaper01.pdf.
Butt welding between dissimilar metals by friction stirring
- Fukumoto M. ,
- Yasui T. ,
- Shimoda Y. ,
- et al
- Fukumoto M. ,
- Yasui T. ,
- Shimoda Y. ,
- Tsubaki M. and
- Shinoda T.
September 2004
Links
Repository
Description
Welding trials are reported to demonstrate joint formation between S45C mild steel and aluminium alloy 6063 using a friction stir diffusion process. Welding experiments were undertaken using a machining centre with a cemented carbide rotating tool, and process parameters (rotation speed, welding speed and tool offset) were optimised. Hardness and tensile strength measurements were undertaken. Cross-sectional microstructure was examined by optical microscopy and SEM, and elemental distribution was determined by energy dispersive x-ray analysis. The microstructure of the interface, HAZ and thermomechanically affected zone is discussed.
5th International Symposium, 14-16 Sep 2004, Session 7A: Steel, Paper 01
Related Records
