Nerman, P., & Andersson, J. (2003, May). Fatigue strength of mixed Al-joints performed with FSW. 4th International Symposium.
Nerman P and Andersson J. "Fatigue strength of mixed Al-joints performed with FSW". 4th International Symposium (May.2003).
Nerman, P and Andersson, J. "Fatigue strength of mixed Al-joints performed with FSW". 4th International Symposium (May.2003).
Nerman P. and Andersson J.Fatigue strength of mixed Al-joints performed with FSW. 4th International Symposium. 2003 May; .
Nerman & Andersson 2003, 'Fatigue strength of mixed Al-joints performed with FSW', 4th International Symposium. Available from: https://www.twi-global.com/technical-knowledge/fsw-symposium-papers/FSWSymposia-200305-8Paper02.pdf.
Nerman P, Andersson J. Fatigue strength of mixed Al-joints performed with FSW. 4th International Symposium. 2003;. https://www.twi-global.com/technical-knowledge/fsw-symposium-papers/FSWSymposia-200305-8Paper02.pdf.
Nerman PP, Andersson JJ. Fatigue strength of mixed Al-joints performed with FSW. 4th International Symposium. 2003 May;. https://www.twi-global.com/technical-knowledge/fsw-symposium-papers/FSWSymposia-200305-8Paper02.pdf.
Fatigue strength of mixed Al-joints performed with FSW
- Nerman P. and
- Andersson J.
- Nerman P. and
- Andersson J.
May 2003
Links
Repository
Description
Different aluminium alloys were joined by friction stir welding (EN AW-5754-H14 to sheets of the same material, extruded profile EN AW-6063-T6 sheets to high pressure die cast EN AC-46000) and characterised by x-ray and microscopy studies, and the measurement of tensile properties and fatigue strength at two load levels. Lap and butt joints in sheet of 3 mm thickness were welded using four different tool designs, and process parameters selected to optimise the joint mechanical properties. Tensile fatigue testing was done at room temperature at a frequency of 20 Hz.
4th International Symposium, 14-16 May 2003, Session 8: Dissimilar & Special Materials 2, Paper 02
Related Records
