Lienert, T.J., Tang, W., Hogeboom, J.A., & Kvidahl, L.G. (2003, May). Friction stir welding of DH-36 steel. 4th International Symposium.
Lienert T J, Tang W, Hogeboom J A, et al. "Friction stir welding of DH-36 steel". 4th International Symposium (May.2003).
Lienert, T J, Tang, W, Hogeboom, J A, et al. "Friction stir welding of DH-36 steel". 4th International Symposium (May.2003).
Lienert T.J., Tang W., Hogeboom J.A. and Kvidahl L.G.Friction stir welding of DH-36 steel. 4th International Symposium. 2003 May; .
Lienert, et al 2003, 'Friction stir welding of DH-36 steel', 4th International Symposium. Available from: https://www.twi-global.com/technical-knowledge/fsw-symposium-papers/FSWSymposia-200305-9BPaper02.pdf.
Lienert TJ, Tang W, Hogeboom JA, Kvidahl LG. Friction stir welding of DH-36 steel. 4th International Symposium. 2003;. https://www.twi-global.com/technical-knowledge/fsw-symposium-papers/FSWSymposia-200305-9BPaper02.pdf.
Lienert TJ , Tang WW, Hogeboom JA , Kvidahl LG . Friction stir welding of DH-36 steel. 4th International Symposium. 2003 May;. https://www.twi-global.com/technical-knowledge/fsw-symposium-papers/FSWSymposia-200305-9BPaper02.pdf.
Friction stir welding of DH-36 steel
- Lienert T.J. ,
- Tang W. ,
- Hogeboom J.A. ,
- et al
- Lienert T.J. ,
- Tang W. ,
- Hogeboom J.A. and
- Kvidahl L.G.
May 2003
Links
Repository
Description
Friction stir welding of DH-36 mild steel sheet was evaluated for shipbuilding applications. Butt welds were prepared in sheet of 4.6 mm (0.18 in) thickness using an unthreaded tool (W, 25%Re) rotating at 400 or 500 rpm and travelling at 203 mm/min (8 in/min) or 254 mm/min (10 in/min) in an inert atmosphere. The welds were assessed by microstructural studies and measurements of microhardness and ultimate tensile strength. Changes in tool dimensions were used to assess tool wear and deformation.
4th International Symposium, 14-16 May 2003, Session 9B: Steels 1, Paper 02
Related Records
