Pao, P.S., Lee, E., Feng, C.R., Jones, H.N., & Moon, D.W. (2003, May). Corrosion fatigue in FSW and GMA welded Al 2519. 4th International Symposium.
Pao P S, Lee E, Feng C R, et al. "Corrosion fatigue in FSW and GMA welded Al 2519". 4th International Symposium (May.2003).
Pao, P S, Lee, E, Feng, C R, et al. "Corrosion fatigue in FSW and GMA welded Al 2519". 4th International Symposium (May.2003).
Pao P.S., Lee E., Feng C.R., Jones H.N. and Moon D.W.Corrosion fatigue in FSW and GMA welded Al 2519. 4th International Symposium. 2003 May; .
Pao, et al 2003, 'Corrosion fatigue in FSW and GMA welded Al 2519', 4th International Symposium. Available from: https://www.twi-global.com/technical-knowledge/fsw-symposium-papers/FSWSymposia-200305-Poster08.pdf.
Pao PS, Lee E, Feng CR, Jones HN, Moon DW. Corrosion fatigue in FSW and GMA welded Al 2519. 4th International Symposium. 2003;. https://www.twi-global.com/technical-knowledge/fsw-symposium-papers/FSWSymposia-200305-Poster08.pdf.
Pao PS , Lee EE, Feng CR , Jones HN , Moon DW . Corrosion fatigue in FSW and GMA welded Al 2519. 4th International Symposium. 2003 May;. https://www.twi-global.com/technical-knowledge/fsw-symposium-papers/FSWSymposia-200305-Poster08.pdf.
Corrosion fatigue in FSW and GMA welded Al 2519
- Pao P.S. ,
- Lee E. ,
- Feng C.R. ,
- et al
- Pao P.S. ,
- Lee E. ,
- Feng C.R. ,
- Jones H.N. and
- Moon D.W.
May 2003
Links
Repository
Description
The microstructure, mechanical properties and fatigue behaviour of friction stir welded (FSW) and MIG welded butt joints in aluminium alloy 2519-T87 (Al, 5.3-6.4%Cu, 0.1-0.5%Mn, 0.02-0.1%Ti) plate of 25.4 mm thickness were compared. Friction stir welds were prepared using a pin rotational speed of 275 rpm and a welding speed of 102 mm/min. The MIG welds were produced using two runs from each side. The welds were characterised by measurements of tensile properties and microhardness, and of fatigue crack growth and fatigue strength in air and in 3.5% sodium chloride solution.
4th International Symposium, 14-16 May 2003, Poster Session, Paper 08
Subjects
- Aluminium and Al alloys
- Nonferrous
- Material
- 2xxx Al series
- Friction welding
- Welding
- Process
- Friction stir welding
- Arc welding
- MIG/MAG welding
- Microstructure
- Weldability
- Process conditions
- Process procedures
- Fracture
- Strength
- Mechanical properties
- Properties
- Fatigue strength
- Hardness
- Ultimate tensile strength
- Yield strength
- Cracking
- Defects
- Fatigue cracks
Related Records
