Shinoda, T. (2001, September). Effect of tool angle on metal flow phenomenon in friction stir welds. 3rd International Symposium.
Shinoda T. "Effect of tool angle on metal flow phenomenon in friction stir welds". 3rd International Symposium (Sep.2001).
Shinoda, T. "Effect of tool angle on metal flow phenomenon in friction stir welds". 3rd International Symposium (Sep.2001).
Shinoda T.Effect of tool angle on metal flow phenomenon in friction stir welds. 3rd International Symposium. 2001 Sep; .
Shinoda 2001, 'Effect of tool angle on metal flow phenomenon in friction stir welds', 3rd International Symposium. Available from: https://www.twi-global.com/technical-knowledge/fsw-symposium-papers/FSWSymposia-200109-Poster06.pdf.
Shinoda T. Effect of tool angle on metal flow phenomenon in friction stir welds. 3rd International Symposium. 2001;. https://www.twi-global.com/technical-knowledge/fsw-symposium-papers/FSWSymposia-200109-Poster06.pdf.
Shinoda TT. Effect of tool angle on metal flow phenomenon in friction stir welds. 3rd International Symposium. 2001 Sep;. https://www.twi-global.com/technical-knowledge/fsw-symposium-papers/FSWSymposia-200109-Poster06.pdf.
Effect of tool angle on metal flow phenomenon in friction stir welds
- Shinoda T.
- Shinoda T.
September 2001
Links
Repository
Description
The effects of stir rod angle (0-3 degrees), rotation speed (500-2500 rpm) and travel speed (1-8 mm/s) on metal flow in friction stir welds in pure aluminium (A-1100) and an Al-0.5%Mg alloy (A-5005) were studied. The microstructure, hardness and tensile strength of the butt-welded joints were determined. The tool angle influenced bottom and surface flow. By increasing the tool angle, the location of the stagnant metal flow moved upwards. Metal flow in the upper portion of the weld occurred in a horizontal circle.
3rd International Symposium, 27-28 Sep 2001, Poster Session, Paper 06
Related Records
