Lu, D.H., Barnes, S., Johnson, R., & Withers, P.J. (2008, May). Comparison between friction stir welding of AZ31 and AZ91 in conditions of low rotation speed. 7th International Symposium.
Lu D H, Barnes S, Johnson R, et al. "Comparison between friction stir welding of AZ31 and AZ91 in conditions of low rotation speed". 7th International Symposium (May.2008).
Lu, D H, Barnes, S, Johnson, R, et al. "Comparison between friction stir welding of AZ31 and AZ91 in conditions of low rotation speed". 7th International Symposium (May.2008).
Lu D.H., Barnes S., Johnson R. and Withers P.J.Comparison between friction stir welding of AZ31 and AZ91 in conditions of low rotation speed. 7th International Symposium. 2008 May; .
Lu, et al 2008, 'Comparison between friction stir welding of AZ31 and AZ91 in conditions of low rotation speed', 7th International Symposium. Available from: https://www.twi-global.com/technical-knowledge/fsw-symposium-papers/FSWSymposia-200805-Poster13.pdf.
Lu DH, Barnes S, Johnson R, Withers PJ. Comparison between friction stir welding of AZ31 and AZ91 in conditions of low rotation speed. 7th International Symposium. 2008;. https://www.twi-global.com/technical-knowledge/fsw-symposium-papers/FSWSymposia-200805-Poster13.pdf.
Lu DH , Barnes SS, Johnson RR, Withers PJ . Comparison between friction stir welding of AZ31 and AZ91 in conditions of low rotation speed. 7th International Symposium. 2008 May;. https://www.twi-global.com/technical-knowledge/fsw-symposium-papers/FSWSymposia-200805-Poster13.pdf.
Comparison between friction stir welding of AZ31 and AZ91 in conditions of low rotation speed
- Lu D.H. ,
- Barnes S. ,
- Johnson R. ,
- et al
- Lu D.H. ,
- Barnes S. ,
- Johnson R. and
- Withers P.J.
May 2008
Links
Repository
Description
Friction stir welding (FSW) experiments were conducted on magnesium alloys, wrought AZ31 (Mg, 3%Al, 1%Zn) and cast AZ91 (Mg, 9%Al, 0.6%Zn), to investigate the effect of process conditions on microstructure and hardness. Welding was performed at rotational speeds of 200 or 300 rpm and traverse speeds of 150-450 mm/min. The macrostructure and microstructure of welded joints were observed by optical microscopy and SEM. Microhardness profiles were measured in a Vickers hardness testing machine. Microstructure evolution and hardness in the weld nugget and thermomechanically affected zone were compared for the two alloys.
7th International Symposium, 20-22 May 2008, Poster Session, Paper 13
Related Records
