Morisada, Y., Fujii, H., Nagaoka, T., & Fukusumi, M. (2008, May). Magnesium alloy based surface composites fabricated by friction stir processing. 7th International Symposium.
Morisada Y, Fujii H, Nagaoka T, et al. "Magnesium alloy based surface composites fabricated by friction stir processing". 7th International Symposium (May.2008).
Morisada, Y, Fujii, H, Nagaoka, T, et al. "Magnesium alloy based surface composites fabricated by friction stir processing". 7th International Symposium (May.2008).
Morisada Y., Fujii H., Nagaoka T. and Fukusumi M.Magnesium alloy based surface composites fabricated by friction stir processing. 7th International Symposium. 2008 May; .
Morisada, et al 2008, 'Magnesium alloy based surface composites fabricated by friction stir processing', 7th International Symposium. Available from: https://www.twi-global.com/technical-knowledge/fsw-symposium-papers/FSWSymposia-200805-Poster15.pdf.
Morisada Y, Fujii H, Nagaoka T, Fukusumi M. Magnesium alloy based surface composites fabricated by friction stir processing. 7th International Symposium. 2008;. https://www.twi-global.com/technical-knowledge/fsw-symposium-papers/FSWSymposia-200805-Poster15.pdf.
Morisada YY, Fujii HH, Nagaoka TT, Fukusumi MM. Magnesium alloy based surface composites fabricated by friction stir processing. 7th International Symposium. 2008 May;. https://www.twi-global.com/technical-knowledge/fsw-symposium-papers/FSWSymposia-200805-Poster15.pdf.
Magnesium alloy based surface composites fabricated by friction stir processing
- Morisada Y. ,
- Fujii H. ,
- Nagaoka T. ,
- et al
- Morisada Y. ,
- Fujii H. ,
- Nagaoka T. and
- Fukusumi M.
May 2008
Links
Repository
Description
SiC particles, multi-walled carbon nanotubes and C60 fullerene were dispersed in an AZ31 alloy matrix by friction stir processing (FSP) and the microstructure and mechanical properties of the surface composites were investigated. The FSP conditions used were a tool rotational rate of 1500 rpm, travel speed of 50 mm/min and a tilt angle of 3 degrees. Microstructure and grain size were analysed by optical microscopy, SEM and TEM. Microhardness was measured with a micro Vickers hardness tester. The effect of FSP on grain refinement and microhardness was examined.
7th International Symposium, 20-22 May 2008, Poster Session, Paper 15
Related Records
